The Mathew's method for open stope design

CIM Bulletin, Vol. 88, No. 992, 1995
S.B.V. Stewart, Kilborn Engineering Pacific, and W.W. Forsyth, Colder Associates, Vancouver, British Columbia

Since the Mathew's method for open stope design was first proposed by Colder Associates in 1980 it has been applied at a number of mine sites in Canada. The initial hypothesis was based on a relatively small amount of data and the intervening period has allowed the collection of a significant amount of new data to test the validity of the method.
This paper examines a brief history of the evolution of rock mass classification systems to provide background and emphasize their empirical and non-rigorous approach. It also presents the new data which appear to indicate that the initial hypothesis was reasonably good. The modification to the original graph proposed by Pot-vin is discussed as well as the applicability of the method to predicting the onset of caving. The original graph has been updated and has been subdivided into four zones described as "stable"; "potentially unstable"; "potential major failure"; and "potential caving". The method is recommended as a useful open stoping design tool provided it is recognized that it is not a rigorous design method.
Finally the paper proposes a recommended approach for application of the method by would-be users and addresses some typical pitfalls that may be encountered.
Full Access to Technical Paper
PDF version for $20.00
Other papers in CIM Bulletin, Vol. 88, No. 992, 1995