A mineralogical evaluation of the spiral circuit at the Mount Wright concentrator by image analysis

Abstract The behaviour of minerals in the Mount Wright spiral circuit was investigated to find methods of improving iron oxide mineral liberation and recovery. The feeds, concentrates and tailings from rougher, cleaner and recleaner spirals in one mill line were sampled before and after the sizing screen openings were reduced from 2 mm to 1.6 mm. Sized fractions of each sample were analyzed with the MP-SEM-IPS image analysis system at CANMET to determine mineral quantities and liberation characteristics of the iron oxide minerals. Mass balance techniques were used to calculate stream recoveries of iron, silica, total iron oxide minerals, hematite, goethite, quartz, ferromagnesian silicates, and liberated and locked total iron oxide minerals for each sieve fraction.
The reduction of the sizing screen openings increased the apparent liberation of the total iron oxide minerals in the screen under-sizefrom 89% to 94% and raised the over-all iron recovery from 84.4% to 85.3%.
Apparent liberation of iron oxide minerals in the cleaner sand also increased from 70% to 85%, but the -75 pm fraction remained the only fraction containing an acceptable amount of liberated iron oxide minerals in each case. Due to limitations of spiral and grinding efficiency it is recommended that the cleaner sand be screened at 300 pm, the +300 pm fraction be reground, and the -300 urn fraction be rerouted to the rougher spirals.
The amount of fine liberated iron oxide minerals (—106 \an) lost in the tailings was 46 TPH in mill line 3. This value represents 41 wt % of the free fine iron oxide minerals, or 7 wt % of the total iron oxide minerals in the spiral feed. Further work is needed to investigate the possibility of recovering this material by other methods.
Middling iron particles (0 to 50%) and presumably free gangue in the size range -300+ 75 psn tend to be recovered by spirals by entrapment.
Keywords: Mineral processing, Image analysis, Mineralogical evaluation, Mount Wright concentrator, Spirals, Gravity concentration , Iron ore, Mineral liberation.
Full Access to Technical Paper
PDF version for $20.00
Search
Sort By:  Relevance
Showing results 1 - 10
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Mineral economics
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Rouyn-Noranda, Pierre Beauchemin, Mine, Yvan Vézina Mine, Mouska, Mouska Project, Silidor Project, Underground exploration, Gold mining
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Richard Leclerc, Raynald Vezina, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Pascalis Mine, Béliveau Mine, Chimo Mine, Gold mining
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Niobec Mine, Niobium, Underground mining
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Robert Voisey, Robert J. Spencer
Keywords: Mineral processing Gold deposits, Silver deposits, MacLellan deposit, Agassiz deposit.
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Doyon, Pierre Beauchemin, Yvan Vézina, Mouska, Silidor, Pascalis, Chimo, Niobec, Valdez Creek, Exploration, Mineral economics
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Doyon Mine, Underground mining, Open pit mining
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Valdez Creek, Alaska, Gold minng, Mineral processing
Issue: 943
Volume: 83
Year: 1990
Text
Publication: CIM Bulletin
Author(s): Louis P. Gignac, Raynald Vezina, Richard Leclerc, Gerald Veillette, Jean Boissonnault
Keywords: Cambior, Exploration
Issue: 943
Volume: 83
Year: 1990
Text
Summary: Significant increases in mill liner life and plant availability can be achieved by following guidelines that have evolved from over twenty years of practical experience with autogenous grinding (AG) and semi-autogenous grinding (SAG) mills. AGand SAG mill liner functions, performance criteria, designs, wear-resistant materials and maintenance procedures are reviewed. Operating practices that can lead to accelerated wear and breakage are discussed.
Publication: CIM Bulletin
Author(s): James L. Parks, David M. Kjos
Keywords: Mineral processing, Grinding, Milling, Operating techniques, Mill liners.
Issue: 943
Volume: 83
Year: 1990
Powered by Coveo Enterprise Search