Fuzzy Logic: a potential control technique for mineral processing

CIM Bulletin, Vol. 80, No. 905, 1987
CA HARRIS and J.A. MEECH, Department of Mining Engineering, Queen's University, Kingston, Ontario
Abstract The application of control theory in mineral processing is more difficult than in other industries because of the complex nature of the unit processes involved and because of problems with accurate on-stream measurement of process variables. Conventional control is based on proportional, integral and derivative functions of a continuously measured error term. Computer control can enhance these actions by incorporating logical routines to switch from one relationship to another. The success of this logical approach depends on our understanding of the process dynamics and the stability of the process and model under all conditions. Typically the model does not apply at all times in mineral processing because of frequent and unmeasurable changes in the ore parameters.
Recent advances in the theory of fuzzy sets have led to the application of this science to process control. Fuzzy Logic can be used to develop heuristic or rule-of-thumb controllers with the strategy based on the actual operating practice of experienced plant operators. Control action has increased flexibility through the adaptation of human reasoning. Acceptance of the control system by operating personnel is significantly higher because of their participation in its formulation. The requirement of an exact model is not essential.
A heuristic controller has been designed and tested with a computer simulation model of a secondary crushing plant. The results of this study are discussed and future applications of this control technique to other mineral processes are suggested.
Keywords: Computer applications, Fuzzy Logic, Mineral processing, Control systems.
Full Access to Technical Paper
PDF version for $20.00
Other papers in CIM Bulletin, Vol. 80, No. 905, 1987