The use of till geochemistry as an exploration tool in southeastern Ontario

Abstract Till geochemistry was the principal exploration tool employed by Selco in the investigation of a zinc prospect in Lanark Township, Ontario. The geochemical studies were undertaken after the discovery at surface of marble boulders containing bands of sphalerite and lesser amounts of galena.
The source of these mineralized boulders was sought by means of B-horizon soil geochemistry, followed, where appropriate, by back-hoe trenching and till sampling. The thickness of the till in this part of Ontario seldom exceeds 3 m or 4m and it was generally possible to sample complete profiles of the till and thus to obtain detailed information concerning the dispersion of zinc. Drilling and trenching at the up-ice extremity of the zinc dispersion trains showed the source of the float to be sub-economic bands of sphalerite in the Grenville marble.
Keywords: Exploration, Geochemistry, Soil geochemistry, Back-hoe trenching, Till sampling.
Full Access to Technical Paper
PDF version for $20.00
Search
Sort By:  Relevance
Showing results 1 - 4
Text
Publication: CIM Bulletin
Author(s): A.L HOLLOWAY, N.M. SOONAWALA, LS. COLLETT
Keywords: Rock mechanics, Geotechnical engineering, Geophysics, Waste disposal, Nuclear fuel waste, Ground-penetrating radar, Radar, Granite rock.
Issue: 896
Volume: 79
Year: 1986
Text
Summary: In bedded deposits such as coal or sedimentary iron, economic limits of mineable reserves are clearly defined by the f ootwall of the seams or ore-bearing units. Where open pits are developed in dipping strata, a long, high f ootwall slope may result. In many cases, unbenched slopes excavated along the base of the lowest mineable seam are operationally simple, economically desirable and geotechnically practical, although a variety of failure mechanisms may develop. This paper examines the...
Publication: CIM Bulletin
Author(s): P.M. HAWLEY, D.C. MARTIN, C.P. ACOTT
Keywords: Rock mechanics, Bedded deposits, Open pit, Footwall slope, Benches, Unbenched slope, Failure mechanisms, Slope stability analyses, Slope design, Geotechnical assessments.
Issue: 896
Volume: 79
Year: 1986
Text
Summary: One approach to stabilization of rock slopes is to place a buttress at the toe of the slope to provide addtional resisting forces and increase the length and strength properties along the failure surface. This paper describes the rock mechanics and mine planning aspects of incorporating a buttress of intact rock in the lower part of the slope as part of the slope design for the south wall of the final pit at Cassiar Mine. "Stability analysis techniques and results are described. Analyses...
Publication: CIM Bulletin
Author(s): DENNIS C. MARTIN, TIM J. CAREW
Keywords: Rock mechanics, Slope design, Buttress, Mine planning, Stability analysis techniques, Slope stability, Cassiar Mine.
Issue: 896
Volume: 79
Year: 1986
Text
Summary: A shallow till sampling program was completed on a 1 km grid over the St. George Batholith in southern New Brunswick. The "B" soil horizon was analyzed for Cu, Pb, Zn, Ag, Co, Mo, U and Sb and the heavy minerals from the "C" soil horizon were ing the anomalous metal contents of overburden to their bedrock source. He is presently studying the metallogeny of an area in New Brunswick mapping the alteration halos around a porphyry copper system and determining the relationship...
Publication: CIM Bulletin
Author(s): V.N. RAMPTON, R.D. THOMAS, S. PARADIS
Keywords: Till geochemistry, Exploration, Shallow till sampling, Bedrock geology, Quarternary geology.
Issue: 896
Volume: 79
Year: 1986
Powered by Coveo Enterprise Search