Case histories in the use of Pulse EM from surface and boreholes as an aid in the detection and definition of deep ore deposits

CIM Bulletin, Vol. 78, No. 876, 1985
J. DUNCAN CRONE, Geophysicist Crone Geophysics Limited
Abstract A test surface Pulse EM(PEM) survey over a plunging massive sulphide lens, located in the Snow Lake area of Manitoba, has shown that it is possible to detect the body to a depth of 300 metres. Another surface survey in the Athabasca basin of Saskatchewan, clearly outlined a large, basement graphitic zone below 450 metres of sandstone cover. Deep detection of these conductive bodies was achieved by energizing large volumes of ground with a strong transmitted EM field. Such large fields also energize all other conductors present in the exploration area. Both of the above survey results indicate that more than one conductor is present. In such cases, detailed field coverage is required for accurate interpretation, and interpretational procedures that assume simple geometrical shapes should be applied with caution. In all cases geological and geophysical information should be coordinated in detail. The first test drill hole still has a high risk of missing the deep conductive body and two or three holes should be budgeted per target.
Borehole Pulse EM surveys are now routinely used to help zero in on deep conductive targets. They are also proving effective in development drilling programs by outlining the edges of conductive bodies. The results of surveys from northern Quebec illustrate how they may provide more accurate shape and tonnage estimates.
Keywords: Mineral exploration, Pulse EM survey, Ore deposits, Massive sulphides, Drilling, Geophysics, Boreholes.
Full Access to Technical Paper
PDF version for $20.00
Other papers in CIM Bulletin, Vol. 78, No. 876, 1985