Ferric sulphate percolation leaching of a pyritic Zn-Pb-Cu ore

CIM Bulletin, Vol. 72, No. 810, 1979
J. E. DUTRIZAC Research Scientist, Mineral Sciences Laboratories, CANMET, Energy, Mines and Resources Canada, Ottawa, Ontario
Abstract A pyritic Zn-Pb-Cu ore was percolation leached with acidified ferric sulphate solutions; zinc and copper were leached, lead was oxidized, but not dissolved, and pyrite was essentially unattacked. High zinc extractions were achieved after a few months leaching, and substantial zinc solution concentrations could be produced by recycle of the oxidized solution. The leaching rate was generally controlled by the transport of the ferric sulphate oxidant. Zinc extractions increased with increasing ferric ion concentration or flow rate, but were essentially independent of the concentrations of sulphuric acid, ferrous sulphate, cupric sulphate or chloride ion. The leaching rates were insensitive to the height of the ore column once a minimum height had been exceeded (0.8-1.0 m). Elemental sulphur was the principal sulphidic reaction product, but variations in the ratio of sulphur to sulphate produced anomalous temperature effects.
Keywords: Mineral processing, Ferric sulphate, Leaching, Percolation leaching, Sulphide ores, Zinc extractions, Brunswick Mining and Smelting Corporation, Dissolution curves, Sulphuric acid, Cupric ions, Chloride ions, Bacterial oxidation.
Full Access to Technical Paper
PDF version for $20.00
Other papers in CIM Bulletin, Vol. 72, No. 810, 1979