Stable Baths for Electroplating Zinc and Cadmium

CIM Bulletin1967
W. Dingley J. Bednar R.R. Rogers Corrosion Section, Extraction Metallurgy Division, Mines Branch, Dept. of Energy, Mines and Resources, Ottawa , Ont.
Zinc is by far the most important metal used for protecting steel from the ravages of corrosion, and cadmium is also used extensively for this purpose. These metals are applied by electrodeposition in cyanide baths when a particularly good appearance and high throwing power are required. One great disadvantage in using these baths has been the decrease in cyanide concentration and the increase in carbonate concentration that takes place during the plating. Another disadvantage has been the development of serious embrittlement in high-strength steels. The present authors have developed new cyanide baths for electroplating both zinc and cadmium on steel. These baths are stable in composition during plating, they have not produced appreciable embrittlement in the highstrength steels that have been investigated up to the present time, and they permit the use of considerably higher plating current densities. In addition, they produce extremely fine grained coatings that are attractive and have excellent adherence and covering properties. Brighteners can be used in the plating baths if bright finishes are required
Full Access to Technical Paper
PDF version for $20.00
Other papers in CIM Bulletin1967