CIM

Safer paste fill exposures

JOIN

Research in Brief: Safer paste fill exposures

Insights from our peer-reviewed journal | Compiled by Megan Skrip - 19 November 2026

Operational constraints at mining sites often mean that paste fill cannot be placed in underground voids in a single, continuous mass. Where an older and newer fill mass meet, discontinuities known as “cold joints” can form.

Co-authors Bre-Anne Sainsbury and David Sainsbury. Courtesy of Bre-Anne Sainsbury

This paper combined laboratory testing and three-dimensional numerical modelling to challenge the assumption that cold joints lack strength, developing a framework to consider how the position and persistence of discontinuities influence the stability of paste fill that is exposed by adjacent mining.

“The research shows that weaknesses formed within paste fill as a result of the placement and curing processes can strongly affect its stability, but they are not necessarily as weak or continuous as commonly assumed,” said co-author Bre-Anne Sainsbury, a professor of geomechanics at Deakin University in Melbourne, Australia. “By measuring their strength in the laboratory and realistically modelling how the fill, surrounding rock and mining sequence interact, mines can design safer exposures that include these weaknesses without adding extra cement and cost.”

The researchers said that specific modelling results will vary by the conditions at individual mines but also drew several generalizable conclusions. For example, a continuous plug pour should have a beam height of at least 20 to 30 per cent of the stope span to maintain stability; discontinuities spaced at heights less than 10 per cent of the span were found to be very unstable.

Read the paper: “The impact of discontinuities within paste fill stopes and practical paste exposure design,” B. Sainsbury and D. Sainsbury, Vol. 17, No. 4

Read more Research in Brief


The CIM Journal  is a quarterly digital publication for peer-reviewed technical papers available to all CIM National Members as a membership benefit and to non-members for a fee. Papers cover all facets of the mining and minerals industry, including geology, mining, processing, metallurgy, materials, maintenance, environmental protection and reclamation, mineral economics, project management, health and safety, risk management, research and development, operations, and regulatory practices and issues.

Since 2020, the CIM Journal  has been published by Taylor & Francis. The editorial process remains the same and CIM National Members continue to have free access to the journal. New papers, in addition to the archives, are now hosted on the CIM Journal site at Taylor & Francis. Papers published prior to 2020 can be found on the CIM Technical Paper Library or on OneMine.

To ensure you can access this CIM Member benefit, please ensure you are logged in to your CIM account.