The development of process mineralogy at Falconbridge Limited and application to the Raglan Mill

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 4
Texte
Sommaire: Gas dispersion in flotation defines the efficiency of the process once the chemistry has been established. There are three measurements, superficial gas velocity, gas holdup, and bubble size, which along with the derived quantity bubble surface area flux, are used to define “gas dispersion.” Sensors for measuring gas dispersion in industrial machines have been developed. This communication describes the working principle of the techniques and illustrates their potential to detect problems and...
Publication: CIM Bulletin
Auteur(s): C.O. Gomez, J.A. Finch
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: Predicting the effect of wear can lead to improved control strategies that can possibly minimize the risk of catastrophic failure due to wear while maximizing useable life. In the field of geological exploration, diamond drill rod wear illustrates just such a case. Wear conditions vary with geological formations and compositions. The objective of this paper is to determine a general relationship, based in theory and practice, that will approximate drill rod wear and therefore predict...
Publication: CIM Bulletin
Auteur(s): P. Radziszewski, R. Laplante, P. De Ciccio
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: The iron ores of the Kiruna mine in Sweden are of exceptional quality except for the phosphorus content in certain zones of the orebody. The prevention of mixing ores high in phosphorus with those low in phosphorus has always been of significant economic importance. The ongoing introduction of tele-mining and automatic haulage by LHDs requires new means in the field of quality control underground, as the experienced miner as well as the underground laboratory assistant no longer are involved...
Publication: CIM Bulletin
Auteur(s): Å. Kruukka, H.F. Broicher
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: Aggregation, i.e., the tendency of particles to cluster, can be expected to influence flotation selectivity. In this paper, a method of measuring aggregation is introduced and used to conduct plant surveys. Aggregation is measured using settling rate and turbidity converted to an aggregation index (AI) where 0 corresponds to most dispersed and 1 to most aggregated over the range of conditions tested, normally pH. Surveys of Cu and Zn flotation stages at four concentrators showed the AI...
Publication: CIM Bulletin
Auteur(s): E. El-Ammouri, M. Mirnezami, D. Lascelles, J.A. Finch
Numéro: 1066
Volume: 95
Année: 2002
Activé par Coveo Enterprise Search