Autogenous milling — Effects on flotation of Mt. Lyell copper ore / Broyage autogène — Effets sur la flottation du minerai de cuivre de Mt. Lyell

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Autogenous grinding;Copper;Mineralogy;Flotation;Ore
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 5
Texte
Sommaire: Comparable transaction analysis is the best known of the market approaches to valuation of exploration-stage mineral properties. The analysis of option and farm-in agreements can also provide useful guidance to valuators. While such approaches can be distorted by incomplete analysis, market-based methods are capable of providing consistent, credible results when carried out carefully with due consideration paid to all factors which buyers and sellers consider when dealing in the real market.
Publication: CIM Bulletin
Auteur(s): R.D. Lawrence
Mots clés: Valuation, Mineral properties, Market approach
Numéro: 1060
Volume: 95
Année: 2002
Texte
Sommaire: In salt and potash mines, the time-dependent deformation mechanism should be clearly understood based on in situ measurements to predict the performance of a mining design. In this study, in situ deformation measurements from the Waste Isolation Pilot Plant (WIPP) and other salt and potash mines were used to determine the transition time from the primary to the secondary creep stage and to investigate the influence of adjacent excavations such as a nearby tunnel excavation, panel excavation...
Publication: CIM Bulletin
Auteur(s): S. Kwon, J.W. Wilson
Mots clés: Underground mining, In situ measurements, Potash, Deformation, Excavation
Numéro: 1060
Volume: 95
Année: 2002
Texte
Sommaire: A simple method is presented whereby the additional quantity and static pressure necessary to compensate for ventilation duct leakage may be estimated using the circular reference functions of modern spreadsheets. Favourable comparisons have been made to the National Coal Board (United Kingdom) design charts and to a case study analysis.
Publication: CIM Bulletin
Auteur(s): G. Auld
Mots clés: Ventilation system, Leakage, Estimation, Air, Pressure
Numéro: 1060
Volume: 95
Année: 2002
Texte
Sommaire: Acid mine drainage (AMD) is one of the most significant environmental challenges facing the mining industry worldwide. It occurs as a result of natural oxidation of sulphide minerals contained in mining wastes at operating and closed/decommissioned mine sites. AMD may adversely impact the surface water and groundwater quality and land use due to its typical low pH, high acidity and elevated concentrations of metals and sulphate content. Once it develops at a mine, its control can be difficult...
Publication: CIM Bulletin
Auteur(s): N. Kuyucak
Mots clés: Acid mine drainage, Prevention, Tailings, Environment, Waste, Sulphides
Numéro: 1060
Volume: 95
Année: 2002
Texte
Sommaire: Vanadium mineralization occurs in oxide-rich horizons within layered metagabbro zones of the Sinarsuk deposit, West Greenland. The main oxide minerals are vanadiferous magnetite and ilmenite, comprising 30% to 90% of the rock volume and the ratio of magnetite to ilmenite ranges from 3:2 to 4:1. Ore microscopy shows that magnetite and ilmenite vary between 0.2 mm and 4.5 mm in grain size, but locally they are coarser grained. Grains are subhedral to euhedral and annealed suggesting that they...
Publication: CIM Bulletin
Auteur(s): T. Grammatikopoulos, A. McKen, C. Hamilton, O. Christiansen
Mots clés: Beneficiation, Magnetite, Ilmenite, Vanadium, Process mineralogy, West Greenland
Numéro: 1060
Volume: 95
Année: 2002
Activé par Coveo Enterprise Search