Kiruna mineral processing starts underground — Bulk sorting by LIF

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 4
Texte
Sommaire: Gas dispersion in flotation defines the efficiency of the process once the chemistry has been established. There are three measurements, superficial gas velocity, gas holdup, and bubble size, which along with the derived quantity bubble surface area flux, are used to define “gas dispersion.” Sensors for measuring gas dispersion in industrial machines have been developed. This communication describes the working principle of the techniques and illustrates their potential to detect problems and...
Publication: CIM Bulletin
Auteur(s): C.O. Gomez, J.A. Finch
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: Predicting the effect of wear can lead to improved control strategies that can possibly minimize the risk of catastrophic failure due to wear while maximizing useable life. In the field of geological exploration, diamond drill rod wear illustrates just such a case. Wear conditions vary with geological formations and compositions. The objective of this paper is to determine a general relationship, based in theory and practice, that will approximate drill rod wear and therefore predict...
Publication: CIM Bulletin
Auteur(s): P. Radziszewski, R. Laplante, P. De Ciccio
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: Aggregation, i.e., the tendency of particles to cluster, can be expected to influence flotation selectivity. In this paper, a method of measuring aggregation is introduced and used to conduct plant surveys. Aggregation is measured using settling rate and turbidity converted to an aggregation index (AI) where 0 corresponds to most dispersed and 1 to most aggregated over the range of conditions tested, normally pH. Surveys of Cu and Zn flotation stages at four concentrators showed the AI...
Publication: CIM Bulletin
Auteur(s): E. El-Ammouri, M. Mirnezami, D. Lascelles, J.A. Finch
Numéro: 1066
Volume: 95
Année: 2002
Texte
Sommaire: Assessment of opportunities to improve mineral processing performance in existing concentrators and in describing undeveloped orebodies is key to improving the business case of a mining company. This assessment has traditionally been performed using the distinct and separate inputs from mineral processing and mineral science. More recently, process mineralogy has been used to integrate these two disciplines. This trend has been driven by the need to develop and process more challenging ore...
Publication: CIM Bulletin
Auteur(s): N.O. Lotter, P.J. Whittaker, L. Kormos, J.S. Stickling, G.J. Wilkie
Numéro: 1066
Volume: 95
Année: 2002
Activé par Coveo Enterprise Search