On the aqueous oxidation of polymetallic Cu-Zn-Pb gold-bearing sulphide ore in an autoclave

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Oxidation;Polymetallic gold;Oxygen;Leaching
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 3
Texte
Sommaire: The development and commercial operation of the Falconbridge chlorine leach process have been described in papers in 1985 and 1987. Since this time, various process improvements have been implemented and the capacity of the Kristiansand refinery has been increased to 85 000 t/y Ni, 40 0000 t/y Cu and 4500 t/y Co. The focus has been on continuous improvements in productivity, the use of energy and other costs. Several environmental issues have also been eliminated or reduced since 1987.
Publication: CIM Bulletin
Auteur(s): E.O. Stensholt, O.M. Dotterud, E.E. Henriksen, P.O. Ramsdal, F. StŒlesen, E. Thune
Mots clés: Falconbridge, Kristiansand refinery, Chlorine leach process, Capacity increases, Operating improvements, Environmental improvements.
Numéro: 1051
Volume: 94
Année: 2001
Texte
Sommaire: This experiment was carried out to see whether copper-iron ingots from Late Bronze Age hoards could have been produced by smelting ferruginous copper ores. Since ferruginous copper-ores are chalcopyritic, chalcopyritic concentrate from a present day copper mine was dead roasted in our experiment in lieu of a rich chalcopyritic ore. Charcoal was used as a reducing agent in the reduction of calcine (i.e., a product of dead-roasting), and quartz sand was used as a flux. Two separate metallic...
Publication: CIM Bulletin
Auteur(s): A. Paulin, J. Roth, S. Spaic
Mots clés: Archaeometallurgy, Bronze Age, Smelting, Copper, Copper-iron alloy, Ramo-secco bar.
Numéro: 1051
Volume: 94
Année: 2001
Texte
Sommaire: Characterization of dust from Boliden Mineral ABÕs copper-plant in Sweden was carried out using chemical analysis, X-ray diffraction analysis, energy dispersive analysis and wave length analysis using electron microprobe equipment. Dust from four different locations was characterized: the electrostatic precipitator (ESP) after the roasting furnace; the ESP after the copper smelting furnace; from the copper converter ventilation bag house filter; and from the bag house filter collecting dust...
Publication: CIM Bulletin
Auteur(s): C. Samuelsson
Mots clés: Characterization, Dust, Electrostatic precipitator (ESP), Smelter, Copper, Vaporization, Condensation.
Numéro: 1051
Volume: 94
Année: 2001
Activé par Coveo Enterprise Search