Characterization of copper smelter dusts

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Characterization;Dust;Electrostatic precipitator (ESP);Smelter;Copper;Vaporization
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 3
Texte
Sommaire: The development and commercial operation of the Falconbridge chlorine leach process have been described in papers in 1985 and 1987. Since this time, various process improvements have been implemented and the capacity of the Kristiansand refinery has been increased to 85 000 t/y Ni, 40 0000 t/y Cu and 4500 t/y Co. The focus has been on continuous improvements in productivity, the use of energy and other costs. Several environmental issues have also been eliminated or reduced since 1987.
Publication: CIM Bulletin
Auteur(s): E.O. Stensholt, O.M. Dotterud, E.E. Henriksen, P.O. Ramsdal, F. StŒlesen, E. Thune
Mots clés: Falconbridge, Kristiansand refinery, Chlorine leach process, Capacity increases, Operating improvements, Environmental improvements.
Numéro: 1051
Volume: 94
Année: 2001
Texte
Sommaire: This experiment was carried out to see whether copper-iron ingots from Late Bronze Age hoards could have been produced by smelting ferruginous copper ores. Since ferruginous copper-ores are chalcopyritic, chalcopyritic concentrate from a present day copper mine was dead roasted in our experiment in lieu of a rich chalcopyritic ore. Charcoal was used as a reducing agent in the reduction of calcine (i.e., a product of dead-roasting), and quartz sand was used as a flux. Two separate metallic...
Publication: CIM Bulletin
Auteur(s): A. Paulin, J. Roth, S. Spaic
Mots clés: Archaeometallurgy, Bronze Age, Smelting, Copper, Copper-iron alloy, Ramo-secco bar.
Numéro: 1051
Volume: 94
Année: 2001
Texte
Sommaire: The paper presents a study on the oxidation of polymetallic gold ore by oxygen in an autoclave. It presents optimum parameters of autoclave leaching of sulphide refractory ore in self-generated sulphuric acid solutions aiming to get products with favourable technological characteristics from which precious and other useful metals can be recovered. A high partial oxygen pressure (1.5 MPa to 2 MPa), high leaching temperature (190¡C to 200¡C), pulp density 80 g/L to 240 g/L, ore fraction size 76...
Publication: CIM Bulletin
Auteur(s): D. Sinadinovic, R. Vracar, Z. Kamberovic
Mots clés: Oxidation, Polymetallic gold, Oxygen, Leaching, Pulp density.
Numéro: 1051
Volume: 94
Année: 2001
Activé par Coveo Enterprise Search