Strength development in underground high-sulphate paste backfill operation

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Paste backfill;Portland cement;Binding agents;Sulphate
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 3
Texte
Sommaire: This paper summarizes the results of numerical studies on drift stability in moderately jointed rock masses. It investigates the relative pertinence of geomechanical factors such as joint orientation, spacing and stress regime. This is undertaken using a distinct element model and a series of parametric studies.
Publication: CIM Bulletin
Auteur(s): M. Grenon, J. Hadjigeorgiou, J.P. Harrison
Mots clés: Drift stability, Joint orientation, Spacing, Stress regime, Displacement.
Numéro: 1050
Volume: 94
Année: 2001
Texte
Sommaire: A review of blast designs and improved blasting practices at the EkatiTM diamond mine is presented along with the results of three blast-monitoring experiments. Blast monitoring was undertaken to investigate blast damage mechanisms in the mineÕs well jointed rock mass. Rock mass damage caused by production, pre-shear and wall control blasts was measured. EkatiTM uses 270 mm holes for production blasting, and 165 mm holes loaded with a decoupled charge for pre-shearing. The production blasts...
Publication: CIM Bulletin
Auteur(s): J. Peterson, D.D. Tannant, J. Todd
Mots clés: Ekati, Blast monitoring, Blast designs, Rock mass damage, Production blasting.
Numéro: 1050
Volume: 94
Année: 2001
Texte
Sommaire: Spray-on polymer linings, as partial or full replacement for traditional forms of area rock support, have seen rapid growth in interest within Canada. A wide variety of lining types, ranging from polymer chemical to water-based cementitious materials, have been developed and commercially introduced to the underground mining market. Following approximately one decade of development work, several general conclusions have been reached regarding the performance of this class of area support...
Publication: CIM Bulletin
Auteur(s): J.F. Archibald, D.O. DeGagné
Mots clés: Spray-on polymer linings, Underground mining, Health and safety, Support, Operational considerations, Cost benefits.
Numéro: 1050
Volume: 94
Année: 2001
Activé par Coveo Enterprise Search