Factors influencing the selection of mine hoist electrical drives

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Equipment;Hoisting systems
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 5
Texte
Publication: CIM Bulletin
Auteur(s): P.M. Tiley, W.G. Spencer, E. Sulis
Mots clés: Equipment, Hoisting systems, Dome Mine.
Numéro: 974
Volume: 86
Année: 1993
Texte
Publication: CIM Bulletin
Auteur(s): A. Zaidi, S. Kumar
Mots clés: Natural gas, Technology, Cogeneration systems, Energy efficiency, NOX emissions.
Numéro: 974
Volume: 86
Année: 1993
Texte
Sommaire: This article addresses the relationship between mine evaluation, the tax system, and economic risk. It is based on a paper presented by the author at recent seminars in Moscow and Tashkent on the subject of mine evaluation.
Publication: CIM Bulletin
Auteur(s): Robert B. Parsons
Numéro: 974
Volume: 86
Année: 1993
Texte
Sommaire: Loading and transportation are important activities of the mining process. Automation of these activities in underground hard rock mining has been discussed for a long time. This paper deals with the performance evaluation of a prototype automatic Load-Haul-Dump (LHD) vehicle (a 7-ton GHH LF LHD model) operating in Zinkgruvan mine, Sweden. The purpose of the data analysis is to evaluate the operational and maintenance characteristics of the automatic LHD system in the mine. Graphical and...
Publication: CIM Bulletin
Auteur(s): D. Kumar, Nick Vagenas
Mots clés: Underground mining, Equipment evaluation, Automatic LHD systems.
Numéro: 974
Volume: 86
Année: 1993
Texte
Sommaire: At Dofasco's No. 4 furnace a variation of the basic oxygen steel-making process, Klockner Oxygen Bottom Maxhutte (K-OBM), is used to produce steel. Large amounts of hot gases and paniculate are evolved during the oxygen blowing phase. A quencher and a venturi scrubber are used to collect over 99.5 % of the paniculate. In 1990, the authors investigated the effect of foamy slag on the paniculate emissions from the furnace. The amount of lime added early in the oxygen blowing cycle was reduced,...
Publication: CIM Bulletin
Auteur(s): E. Cocchiarella
Mots clés: Basic oxygen processes, Foamy slag, Particulates, Fume suppression, Waste BOF oxides.
Numéro: 974
Volume: 86
Année: 1993
Activé par Coveo Enterprise Search