Practical rock engineering stope design case histories from Noranda Minerals Inc.

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Rock mechanics;Stope design;numerical-modelling;Empirial design;Mine design;Slope stability
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 6
Texte
Sommaire: This paper introduces a new approach for the design of rib pillars. The approach involves an empirical method for pillar design and a discussion of the pillar stability used for open stope mining methods.
The empirical method predicts the degree of stability of rib pillars. Pillar load is estimated using two and three dimensional numerical modelling. Rock strength and the shape effect of pillars are used to account for pillar strength. The method has been calibrated with case histories from...
Publication: CIM Bulletin
Auteur(s): Y. Potvin, M. Hudyma, H.D.S. Miller
Mots clés: Rock mechanics, Pillar design, Open stope mining
Numéro: 927
Volume: 82
Année: 1989
Texte
Sommaire: The influence of annealing of galvanized steel (galvannealing) on its corrosion kinetics in a saturated solution of Ca (OH)2 has been studied by means of the polarization resistance method.
Galvannealing heat treatment was carried out at 450°C and 550°C for varying times. Annealing at 450°C for 24 hr or at 550°C for 5 hr showed the highest corrosion potential (Ecorr) = - 400 m V/SCE as well as, the lowest corrosion current density (icorr = 3 mA.cm-2, while Ecorr and icorr...
Publication: CIM Bulletin
Auteur(s): M.I. Abbas, M.S. Ahmed, M.A. Shahin
Mots clés: Metallurgy, Corrosion, Steel, Gavanized steel, Galvannealling heat treatments
Numéro: 927
Volume: 82
Année: 1989
Texte
Sommaire: A kinematically admissible velocity field is applied to study the arching phenomenon in a cohesionless granular backfill placed between two rough vertical inflexible walls. The study is different from the previous works which are almost entirely based on statically admissible stress fields. It is shown that the development of arches is strongly influenced by the previous loading history of the backfill which controls the nature of the constitutive laws that govern the mode of stress deformati...
Publication: CIM Bulletin
Auteur(s): H.B. Poprooshasb, F.P. Hassani
Mots clés: Rock mechanics, Arching phenomena, Backfill, Underground mining
Numéro: 927
Volume: 82
Année: 1989
Texte
Sommaire: Unanticipated low recovery or extraction of gggoldfrom heap teachable ore can often be attributed to phenomena such as non-uniform percolation (channelling) of solution through heaps, excessively slow percolation rates due to densification of ore during stacking on the pads and parasitic or competing reactions of the cyanide solution with undesirable elements or geochemical "impurities" in the ore. The nature and causes of these phenomena are discussed in this paper, and it is...
Publication: CIM Bulletin
Auteur(s): R.F. LOPES, P.L LEHOUX
Mots clés: Mineral processing, Extraction, , Gold, Leaching, Heap leaching, Ore preparation, Agglomeration
Numéro: 927
Volume: 82
Année: 1989
Texte
Sommaire: With the growth of large scale surface mining operations, waste disposal and stability of waste dumps pose a challenging problem to engineers. Vibrations due to blasting operations proximal to these dumps further complicates dump design. Many dumps which are statically stable may become unstable due to the effects of blasting vibrations.
A joint project between CANMET and Smoky River Coal Ltd. has been initiated to study the dynamic stability of waste dumps. The study involves development of...
Publication: CIM Bulletin
Auteur(s): B. Stuckert, J. Balfour, D. Fawcett, P. Sheehan, B. (Manas) Das
Mots clés: Rock mechanics, Waste dumps, Surface mining, Blasting, Slope stability
Numéro: 927
Volume: 82
Année: 1989
Texte
Sommaire: The need for monitoring the effect of changes in ground stresses due to mining in hard rock has existed for many years. The Mining Research Laboratories of CANMET, EMR have developed a new tool which monitors with high precision the radial deformation in boreholes. The result is the Mining Research Laboratories strain monitoring system (MSMS) which uses the highly stable and very sensitive vibrating wire principle to monitor deformations in relatively large boreholes, e.g. 76 mm to 153 mm...
Publication: CIM Bulletin
Auteur(s): G. Herget, F. Kapeller
Mots clés: Rock mechanics, Monitoring equipment, Equipment, Instrumentation
Numéro: 927
Volume: 82
Année: 1989
Activé par Coveo Enterprise Search