Ammonium sulphate as activator in sulphidized xanthate flotation of malachite

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Mineral Processing;Xanthate flotation;Malachite;Sulphidized xanthate flotation;Flotation processes
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 7
Texte
Publication: CIM Bulletin
Auteur(s): MacKenzie Dickson
Mots clés: Gold recovery, Dewatering, Screening, Carbon dewatering.
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: The mineralogical studies done on Hope Brook ore samples indicated that a heap leach gold recovery process may be possible. In the metallurgical program that followed, column tests confirmed this interpretation. A 9300 tonne demonstration heap leach test, in the late fall of 1985, reaffirmed laboratory results while identifying operating conditions that will have to be addressed in a production heap leach plan. Operating plans, gold recoveries and cost areas will be presented.
Another...
Publication: CIM Bulletin
Auteur(s): G.W. McDonald
Mots clés: Metallurgy, Mineral processing, Gold recovery, Mineral extraction.
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: Once all the hullabaloo about Finance Minister Wilson's April 27 budget died down (or was it an April 26 budget?), the pain of the budget papers began to sink in. Individuals and corporations will have to dig deeper and pay more taxes — and government will continue to dig deeper and spend more. The irony of the situation is that higher tax rates actually make flow-through shares more attractive as a tax-deferral investment — a bittersweet "bravo" for the mining industry.
Publication: CIM Bulletin
Auteur(s): Robert B. Parsons
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: Stillwater Mining Company (SMC), a partnership of Chevron Resources and Manville Corporation, produces a copper-nickel, platinum-palladium flotation concentrate at its Nye, Montana mine. The concentrate is then toll processed in Europe. Recognizing the economic advantage of treating the concentrates at the mine site and of retaining this strategic resource in the United States, the Company commissioned Tolltreck International Limited and International Process Research Corporation to conduct...
Publication: CIM Bulletin
Auteur(s): J. W. Matousek, P.J. Marcantonio, R.J. Phillips, J.G. Whellock
Mots clés: Pyrometallurgy, Ore Recovery, Smelting tests, Pilot plant smelting.
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: A multielement (Au, Cu, Pb, Zn, Ni, Cr, Ag, As, Hg, Co, and S) geochemical rock sampling survey was carried out in 1977 in the Munro Township area of Ontario to assess the application of rock geochemistry for gold exploration in the region. Detailed sampling with analysis for gold and arsenic was done in 1986 in the immediate vicinity of the Croesus Mine.
Samples of quartz veins and rock formations were taken in regional traverses and in more detail near old showings, prospect pits, and...
Publication: CIM Bulletin
Auteur(s): G.R. Webber, P.J. Whittaker
Mots clés: Geochemistry, Gold, Exploration, Geology.
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: The mine operator has two prime objectives when he operates a mine: (1) the mine must be safe, and (2) the mine must operate with the lowest possible costs. The operator constantly faces a dilemma; if he is over cautious with regard to safety, his costs may be very high, and if he is over-zealous in trying to reduce costs, the safety of his operation may be jeopardized.
Modern bulk mining methods rely heavily on high productivity non-entry sloping techniques (e.g. open sloping, VCR, etc.)....
Publication: CIM Bulletin
Auteur(s): J. W. Bawden, J. Nantel, D. Sprott
Mots clés: Rock mechanics, Cost effective mining, Empirical design techniques, Underground mining Mine design, Support systems, Safety.
Numéro: 926
Volume: 82
Année: 1989
Texte
Sommaire: The mine operator has two prime objectives when he operates a mine: (1) the mine must be safe, and (2) the mine must operate with the lowest possible costs. The operator constantly faces a dilemma; if he is over cautious with regard to safety, his costs may be very high, and if he is over-zealous in trying to reduce costs, the safety of his operation may be jeopardized.
Modern bulk mining methods rely heavily on high productivity non-entry sloping techniques (e.g. open sloping, VCR, etc.)....
Publication: CIM Bulletin
Auteur(s): J. W. Bawden, J. Nantel, D. Sprott
Mots clés: Rock mechanics, Cost effective mining, Empirical design techniques, Underground mining Mine design, Support systems, Safety.
Numéro: 926
Volume: 82
Année: 1989
Activé par Coveo Enterprise Search