Summary of twenty-four surface crown pillar case studies

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Rock mechanics;Surface crown pilliars Pillar design;Case studies;Underground mining
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 6
Texte
Sommaire: Smoky River Coal Limited has successfully completed a major program involving the pattern rock anchoring of a high, steeply-dipping footwall slope. The slope dips at approximately 65 to 70 degrees to the north, is benched for the upper 200 feet, is supported with rock anchors for another 240 feet, and is unsupported at the pit bottom. In addition to the height and steepness, several structural features including shears, rolls and stratigraphic pinchouts complicate footwall stability.
This...
Publication: CIM Bulletin
Auteur(s): DAVID A. FAWCETT, PETER L SHEEHAN, DENNIS C. MARTIN
Mots clés: Rock mechanics, Smoky River Coal Limited, Footwall anchoring, Engineering geology, Anchor installation, Instrumentation.
Numéro: 915
Volume: 81
Année: 1988
Texte
Sommaire: The development and testing of a simple low-cost gauge for measurement of tension in a cable bolt grouted in a borehole are presented. Its principle is based on a resistance wire which is wound on a 70 cm length into the spiral grooves of the wire strand cable bolt. Readings are then taken by a robust automatic data logger with a several day autonomy or by a portable readout. In order to have a complete profile of tension along the cable bolt, a number of tension gauges can be installed along...
Publication: CIM Bulletin
Auteur(s): P. CHOQUET, F. MILLER
Mots clés: Rock Mechanics, Instrumentation, Monitoring, Steel cable, Tendon, Anchor, Cable bolt, Rock support, Slope stability, Ore dilution, Mining technology, Underground mining.
Numéro: 915
Volume: 81
Année: 1988
Texte
Sommaire: Aluminum alloy structural components for aircraft designed prior to the early 1970s, were machined from 2024, 7075 and 7079 plate, bar and forgings in either the T3xxx of the T6xxx tempers. Protective treatments for these parts consisted of chromic acid anodizing and alkyd zinc chromate primer, plus a nitrocellulose lacquer for exterior parts.
The major service problem with these parts was the frequent occurrence of exfoliation corrosion and stress corrosion cracking (S.C.C.). Therefore, 2024...
Publication: CIM Bulletin
Auteur(s): L. SALNAIS
Mots clés: Materials engineering, Corrosion, Metallurgy, Coatings, Aerospace materials, Metals.
Numéro: 915
Volume: 81
Année: 1988
Texte
Sommaire: The access tunnels for the Donkin-Morien Mine in Cape Breton, Nova Scotia, comprise (wo parallel tunnels driven through a sedimentary sequence of sandstone, siltstone and mudstone to intersect the Harbour Coal Seam under the Atlantic Ocean, approximately 3.5 km offshore (Fig. 1). The No. 2 tunnel was driven a total distance of 3579 m using a 7.6 m diameter Lovat full-face tunnel boring machine (TBM) and was supported by steel sets. The No. 3 tunnel was initially driven a distance of 1027 m...
Publication: CIM Bulletin
Auteur(s): J.L GILBY, C.M.K. YUEN, T.R.C. ASTON
Mots clés: Rock mechanics, Tunnel boring, Research programs, Instrumentation programs, Donkin-Morien Mine.
Numéro: 915
Volume: 81
Année: 1988
Texte
Sommaire: A regional till sampling program in the Upsalquitch Forks-Tetagouche Lakes area, centred some 70 km west of the city of Bathurst, has proven an effective method for gold exploration in the heavily glaciated interior of northern New Brunswick. Prospecting activities within this area over the past three years, have led to the discovery of several gold occurences associated with quartz-carbonate alteration in a variety of intrusive rock types emplaced along major fault zones.
Quaternary mapping...
Publication: CIM Bulletin
Auteur(s): A.G. PRONK, D.M. BURTON
Mots clés: Till geochemistry, Gold, Exploration, Bedrock geology, Mineral occurances, Quarternary geology.
Numéro: 915
Volume: 81
Année: 1988
Texte
Sommaire: As part of a study to evaluate factors affecting tankroom air quality, the mechanism of aerosol generation from bursting bubbles in electrowinning operations has been investigated. Typically 2 to 3 mg/m2.s are produced in zinc tankrooms. Analysis shows that the rate of production of film drops (geometric mean diameter ~ 2 fim) increases with decreasing bubble size, and that jet droplets (geometric mean diameter —20 fj.m) are not produced with gas bubble larger than ~ 4 mm. Both...
Publication: CIM Bulletin
Auteur(s): J. VAN DUSEN, A. PAPACHRISTODOULOU, J.W. SMITH
Mots clés: Air quality, Electrowinning, Coalescence, Health, Safety, Environmental control
Numéro: 915
Volume: 81
Année: 1988
Activé par Coveo Enterprise Search