The use of till geochemistry as an exploration tool in southeastern Ontario

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Exploration;Geochemistry;Soil geochemistry;Back-hoe trenching
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 4
Texte
Publication: CIM Bulletin
Auteur(s): A.L HOLLOWAY, N.M. SOONAWALA, LS. COLLETT
Mots clés: Rock mechanics, Geotechnical engineering, Geophysics, Waste disposal, Nuclear fuel waste, Ground-penetrating radar, Radar, Granite rock.
Numéro: 896
Volume: 79
Année: 1986
Texte
Sommaire: In bedded deposits such as coal or sedimentary iron, economic limits of mineable reserves are clearly defined by the f ootwall of the seams or ore-bearing units. Where open pits are developed in dipping strata, a long, high f ootwall slope may result. In many cases, unbenched slopes excavated along the base of the lowest mineable seam are operationally simple, economically desirable and geotechnically practical, although a variety of failure mechanisms may develop. This paper examines the...
Publication: CIM Bulletin
Auteur(s): P.M. HAWLEY, D.C. MARTIN, C.P. ACOTT
Mots clés: Rock mechanics, Bedded deposits, Open pit, Footwall slope, Benches, Unbenched slope, Failure mechanisms, Slope stability analyses, Slope design, Geotechnical assessments.
Numéro: 896
Volume: 79
Année: 1986
Texte
Sommaire: One approach to stabilization of rock slopes is to place a buttress at the toe of the slope to provide addtional resisting forces and increase the length and strength properties along the failure surface. This paper describes the rock mechanics and mine planning aspects of incorporating a buttress of intact rock in the lower part of the slope as part of the slope design for the south wall of the final pit at Cassiar Mine. "Stability analysis techniques and results are described. Analyses...
Publication: CIM Bulletin
Auteur(s): DENNIS C. MARTIN, TIM J. CAREW
Mots clés: Rock mechanics, Slope design, Buttress, Mine planning, Stability analysis techniques, Slope stability, Cassiar Mine.
Numéro: 896
Volume: 79
Année: 1986
Texte
Sommaire: A shallow till sampling program was completed on a 1 km grid over the St. George Batholith in southern New Brunswick. The "B" soil horizon was analyzed for Cu, Pb, Zn, Ag, Co, Mo, U and Sb and the heavy minerals from the "C" soil horizon were ing the anomalous metal contents of overburden to their bedrock source. He is presently studying the metallogeny of an area in New Brunswick mapping the alteration halos around a porphyry copper system and determining the relationship...
Publication: CIM Bulletin
Auteur(s): V.N. RAMPTON, R.D. THOMAS, S. PARADIS
Mots clés: Till geochemistry, Exploration, Shallow till sampling, Bedrock geology, Quarternary geology.
Numéro: 896
Volume: 79
Année: 1986
Activé par Coveo Enterprise Search