On-line computer applications in mineral processing

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Mots clés : Computer applications;Mineral Processing;Flotation;Process control;Concentrator;Automation;Copper dewatering;Zinc dewatering
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 6
Texte
Publication: CIM Bulletin
Auteur(s): GRAHAM E. BROWN
Mots clés: Computer technology, Interactive Graphics Systems, Computer Graphics, Engineering office, Project control, Communications.
Numéro: 878
Volume: 78
Année: 1985
Texte
Sommaire: Rational exploration requires the prior selection of areas possessing excellent geological potential and minimum hazards to commercial development. Within an over-all strategy of grass-roots exploration, two procedures for selecting areas for (i) coal and (ii) metals exploration are described. The procedures explicitly balance infrastructure requirements and environmental concerns for areas of geological merit not alienated in parks and reserves. Through consensus, priorities are attached to...
Publication: CIM Bulletin
Auteur(s): J.H. SHILLABEER
Mots clés: Exploration development, Planning, Coal exploration, Metals exploration, Project generation, Decision analysis, Environmental concerns, British Columbia.
Numéro: 878
Volume: 78
Année: 1985
Texte
Sommaire: Data from the South Fork Pit Area of the Bullmoose deposit in northeastern British Columbia are used to demonstrate the usefulness of microcomputers to the on-site geologist. The technique utilizes a series of digital surfaces in the form of a network of points to define various geologic parameters such as seam positions, topography and coal quality characteristics. Manual digitizing, kriging and combinations of these techniques are used to calculate these digital surfaces, the best method...
Publication: CIM Bulletin
Auteur(s): WARD E. KILBY, BRUCE I. McCLYMONT
Mots clés: Computer applications, Microcomputers, Geological modelling, Coal mining, Kriging, Bullmoose Coal Mine, Deposit modelling.
Numéro: 878
Volume: 78
Année: 1985
Texte
Sommaire: Concepts of linear elastic fracture mechanics were applied to study two cases of failure, namely an equalizing beam from a tandem rear axle of a highway tractor unit and the main beam of a flat bed trailer. In the first case, the presence of a crack, initiated by stress corrosion cracking followed by significant fatigue crack propagation produced a state of stress which was sufficient to produce brittle failure. Calculation of the fatigue life agreed with the number of cycles that the...
Publication: CIM Bulletin
Auteur(s): W.W. TENNESE, M.N. BASSIM
Mots clés: Metallurgy, Fracture mechanics, Failure analysis. Metallography, Tensile properties, Chemical analysis
Numéro: 878
Volume: 78
Année: 1985
Texte
Sommaire: The lead concentrate produced from the volcanogenic base metal ore of Brunswick Mining and Smelting in New Brunswick contains major to trace amounts of iron, zinc, cadmium, arsenic, antimony, copper, silver, selenium, tellurium, bismuth, sulphur, tin, indium, mercury and manganese as impurities. When the concentrate is sintered some of these impurities enter a variety of oxide phases, whereas others precipitate as metals. In the lead blast furnace the oxide phases decompose and the impurities...
Publication: CIM Bulletin
Auteur(s): W. PETRUK, D.R. MORRIS
Mots clés: Metallurgy, Smelters, Lead concentrates, Sintering, Brunswick Mining and Smelting, Blast furnace.
Numéro: 878
Volume: 78
Année: 1985
Texte
Sommaire: The object of this paper is to outline a computerized net cash flow approach for practical cutoff grade determinations. A cutoff grade carries not only geological but also economic value, in which costs are balanced against revenues. For different situations, cutoff grades are a 'standard of value' that are determined for the purpose of classifying economic or uneconomic mineral reserves in a specified time frame. In a constantly changing technical and economic environment, the decision to...
Publication: CIM Bulletin
Auteur(s): ARNOLD R. PASIEKA, GEORGE V. SOTIROW
Mots clés: Computer applications, Cutoff grades, Cash flow, Costs, Capital expenditures, Ore reserves, Computer programs.
Numéro: 878
Volume: 78
Année: 1985
Activé par Coveo Enterprise Search