THE ASBESTOS HILL - IMORDENHAM STORY - Geology of the Asbestos Hill Area

Cette publication n'est pas offerte dans votre langue; certains de ses renseignements ont été préremplis pour la version française.
Accés complet à Document technique
Version PDF pour 20,00 $
Recherche
Trier par :  Pertinence
Affichage des résultats 1 - 9
Texte
Sommaire: The ungraded-fibre mill is located at the mine site and has a rated capacity of 6,600 tons of ore input and 1,200 tons of ungraded fibre product per day. Power for operation is obtained from a diesel generating plant located on the site, which has a capacity of 5,300 kW.
The preliminary milling process consists of primary and secondary crushing, drying and temporary storage of plus-lVz-in. material.
Publication: CIM Bulletin
Auteur(s): C. Gordon Saunders
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: Taxation tends to be a depressing subject. Taxes are unfair, taxes are too high and, above all, taxes are too complicated.
In a recent address to the Canadian Tax Foundation, the author discussed in a rather more lighthearted way the possible causes of the complexity of the present Canadian taxation system. In order to provide an element of relief in this series of articles on taxation matters, extracts from these remarks are quoted below
Publication: CIM Bulletin
Auteur(s): R. D. Brown
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: The Nordenham finishing mill is situated in the town of Nordenham, Federal Republic of Germany, on the banks of the Weser River opposite the town of Bremerhaven, with access by water to the North Sea.
The unfinished fibre, shipped from Deception Bay during the sub-Arctic summer shipping season, is unloaded from bulk ocean carriers, stored and then processed throughout the year until the following shipping season.
This paper describes the unloading and storage facilities, the finishing mill...
Publication: CIM Bulletin
Auteur(s): W. R. A. Graeser
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: Engineering and technical services are supplied by the Engineering Department, located at Thetford Mines, Quebec, approximately 60 miles southwest of Quebec City. The department serves the three operating mines in the Thetford area, the Asbestos Hill mine at Putuniq, Nouveau Quebec, and the Nordenham plant at Nordenham, West Germany.
The Engineering Department is responsible for supplying the following services.
1. Administration and coordination of capital projects.
2. Engineering, design...
Publication: CIM Bulletin
Auteur(s): M.-L. Trepanier
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: In 1957, an asbestos orebody was discovered in the northern sector of the Ungava Peninsula of the Province of Quebec, an area now identified as Asbestos Hill. The deposit is situated on a plateau 1700 feet above sea level and 42 miles inland from Hudson Strait. It is a bleak, isolated location of typical arctic environment.
Fifteen years were to pass before the first shipment of ungraded fibre was made in 1972. These years were occupied with field surveys and investigations, diamond drilling,...
Publication: CIM Bulletin
Auteur(s): S. A. Luciani
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: Asbestos Corporation Limited, incorporated in 1925, operates four asbestos mines and three asbestos mills in the Thetford Mines region of Quebec's Eastern Townships. A unique asbestos orebody, located in the Ungava Peninsula of Nouveau Quebec, was purchased by Asbestos Corporation Limited in 1964 and commenced production in 1972.
As there were no existing facilities in the isolated, arctic region of Asbestos Hill, it was necessary for Asbestos Corporation Limited to construct at Deception Bay...
Publication: CIM Bulletin
Auteur(s): W. Harry Foster
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: The yearly production from the Asbestos Hill pit is 1,550,-000 tons of asbestos ore, with a yield varying between 18 and 20%. The orebody was exposed at the top of a hill, and initial production started without having to remove any overburden. The projected ratio of barren rock to ore, based on the present orebody, was 2 to 1. However, as it was necessary to push back the upper benches, this ratio has changed to 3 to 1.
The final pit will be 2,300 feet long by 1,000 feet at the longest and...
Publication: CIM Bulletin
Auteur(s): Romeo Roussin
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: This paper describes the engineering and construction activities of the "design-build" project awarded to the joint venture of Foundation-Comstock-Janin for the construction of the plant and wharf facilities, camp site, power plant and all supporting services. As a member of the Foundation Group of companies at that time, Fenco acted as consulting and design engineers for the project. Particular emphasis is given to the problems which adversely affected design and construction activities due...
Publication: CIM Bulletin
Auteur(s): F. S. Thurner
Numéro: 775
Volume: 69
Année: 1976
Texte
Sommaire: This paper defines the responsibilities and functions of the Maintenance Department, and its organization, physical and human assets, highlighting the unique operating problems.
Due to the self-sufficient aspect of the Asbestos Hill -Deception Bay project, the Maintenance Department covers fields that are numerous and very dissimilar: production, mobile, processing, service, power generation, fire protection, heating, water and sewage disposal equipment. Added to this, buildings, plant and...
Publication: CIM Bulletin
Auteur(s): Guy Demers
Numéro: 775
Volume: 69
Année: 1976
Activé par Coveo Enterprise Search